Based on the long-established RadusCard for RFID and PIN cards, the characteristics of the RadusCard CC have been specially designed for the fully automatic and efficient serial numbering of trading cards and processes single cards made of paper and plastic in common European and American formats with various surfaces. Cards to be numbered are separated fully automatically, checked for double cards and then fed to the SU4 hot stamping numbering head for sequential numbering in a guided card transport. Incorrectly inserted cards or cards that deviate from the design are reliably recognised by the camera system integrated in the infeed, omitted from the numbering process and ejected into a bad card box at the end of the card transport. For numbering small series, the system is equipped with a special numbering unit for quick adjustment. This enables the numbering unit to be easily adjusted or reset within a few seconds, without the operator coming into direct contact with the heated numbering unit itself. After numbering, the cards are dispensed in a card stacker in increasing sequence. (lowest number at the top) For uninterrupted operation, both the card feeder and the card stacker can be filled and emptied during production without stopping the machine.

Design Features  Special card feeder for various materials and sensitive surfaces  Centralised adjustment for card thickness and integrated double card detection  Guided card transport with camera system for card pre-checking and reject box  SU4 hot stamping numbering head - 360° rotatable for length- and crosswise numbering  Numbering unit with quick adjustment for 00/00, 000/000 and 0000/0000 modes  Card stacker for card output in increasing sequence Basic Machine RadusCard-CC with SU4 Hot-Stamping Head Controlling Microprocessor Operation Fully automatic / intermittent Controll desk 7“ Touch display PC control Windows™ Transport System Card format 88,0mm x 62,0mm to 88,9mm x 63,5mm Thickness 0,25 – 1,0 mm (10 – 40 mil) Material Cardboard, different laminates, plastics such as PVC, ABS, etc. Magazine size 250mm Numbering Head SU4 (hot-stamping) Foil size Width up to 55mm, max. diameter ø100mm Core diameter 1“ Numbering area up to 50x5mm Print carrier Rotary numbering machines of steel or part carrier Print orientation 360° rotatable on his own axis for lenght- and crosswise numberings Foils hot stamping foils, colored and metallized gold, silver etc. Temperature 70° bis 150°C Dwell time 0,05 - 2 sec. Cooling time 0,01 - 2 sec. Connections Air connection 4 bar, oil-free and dry Electrical con. Single phase 220-240V (110V), 50/60Hz consumption max. 1kW Dimensions 2970 x 790 x 1510 mm (length x depth x height) Performance • up to 6.000 numberings/h

numbered single cards

Based on the long-established RadusCard for RFID and PIN cards, the characteristics of the RadusCard CC have been specially designed for the fully automatic and efficient serial numbering of trading cards and processes single cards made of paper and plastic in common European and American formats with various surfaces. Cards to be numbered are separated fully automatically, checked for double cards and then fed to the SU4 hot stamping numbering head for sequential numbering in a guided card transport. Incorrectly inserted cards or cards that deviate from the design are reliably recognised by the camera system integrated in the infeed, omitted from the numbering process and ejected into a bad card box at the end of the card transport. For numbering small series, the system is equipped with a special numbering unit for quick adjustment. This enables the numbering unit to be easily adjusted or reset within a few seconds, without the operator coming into direct contact with the heated numbering unit itself. After numbering, the cards are dispensed in a card stacker in increasing sequence. (lowest number at the top) For uninterrupted operation, both the card feeder and the card stacker can be filled and emptied during production without stopping the machine.

Design Features  Special card feeder for various materials and sensitive surfaces  Centralised adjustment for card thickness and integrated double card detection  Guided card transport with camera system for card pre-checking and reject box  SU4 hot stamping numbering head - 360° rotatable for length- and crosswise numbering  Numbering unit with quick adjustment for 00/00, 000/000 and 0000/0000 modes  Card stacker for card output in increasing sequence Basic Machine RadusCard-CC with SU4 Hot-Stamping Head Controlling Microprocessor Operation Fully automatic / intermittent Controll desk 7“ Touch display PC control Windows™ Transport System Card format 88,0mm x 62,0mm to 88,9mm x 63,5mm Thickness 0,25 – 1,0 mm (10 – 40 mil) Material Cardboard, different laminates, plastics such as PVC, ABS, etc. Magazine size 250mm Numbering Head SU4 (hot-stamping) Foil size Width up to 55mm, max. diameter ø100mm Core diameter 1“ Numbering area up to 50x5mm Print carrier Rotary numbering machines of steel or part carrier Print orientation 360° rotatable on his own axis for lenght- and crosswise numberings Foils hot stamping foils, colored and metallized gold, silver etc. Temperature 70° bis 150°C Dwell time 0,05 - 2 sec. Cooling time 0,01 - 2 sec. Connections Air connection 4 bar, oil-free and dry Electrical con. Single phase 220-240V (110V), 50/60Hz consumption max. 1kW Dimensions 2970 x 790 x 1510 mm (length x depth x height) Performance • up to 6.000 numberings/h

numbered single cards