Cookie Consent by PrivacyPolicies.com
© 2021 Arnold Herzig GmbH • Germany - All rights reserved

Smart and Innovative Solutions for the Security Printing Industry

Smart and Innovative Solutions - since 1964
Arnold Herzig GmbH
En
De

Embedded DOVID Patch Applicator for Polycarbonate PC

RADUS SV-360 PC [up to 8 Heads]
The Radus SV-360 PC offers the efficient application of embedded DOVIDs (Holograms / Kinegrams) onto polycarbonate sheets for passport data pages, driving licenses and ID documents in high volumes. Due to its modular construction, the machine covers the complete range of polycarbonate layouts from e.g. 2x2 to 4x5 for passport data pages, up to common layouts for embedded DOVIDs on ID cards and DL cards with 3x8 and 8x6 (ID-1). The system processes typical polycarbonate overlay films of common manufacturers from 50 to 150 micron and enables an output at an average of 1250 sheets / h for 3x8 (24 images) and 1000 sheets / h for 8x6 (48 images). Mirrored product layouts for passport holderpages can be easy processed in one production run by turned hologram feed direction of individual embossing stations. The sophisticated foil separation technology in combination the electrostatic discharge devices ensure a clean result and sharp hologram edges. HP3 hot stamping hologram applicator The well-proven hologram application head HP3 is especially suitable for applying embedded DOVID patches on polycarbonate overlay sheets up to secure Level 3 in a stamping size of max. ø40 mm. The heads work electronically / pneumatically and are monitored by the machine's process control. The HP3 unit contains the hot stamping press with the replaceable stamping die and the associated fine adjustment as well as the foil feed. In this way, the complete hologram application head can be moved across the sheet direction of run in a quick adjustment for positioning. There is no complex conversion of the stamping die or tracking of the foil; jobs can be set-up in shortest time. Print mark recognition with unique „on the fly“ image positioning A multistage tension control in the hologram hot foil track and an accurate guidance guarantee precise hologram feed. After registration mark detection „on the fly“, directly at the hot stamping die, the foil with the holographic image is positioned using electronics only (Resolution 0.01mm); there is no need for the time consuming manual fine adjustment of the photocells for image positioning. The image position of the hot foil hologram under the stamping die can be easily adjusted via the touch display - even during ongoing stamping operation. Options If necessary, further work stations can be retrofitted at any time. Here too, one or two HP3 hot stamping hologram heads can be used. Then, with up to eight hologram application heads, even smaller product sizes at individual sheets (8x6) such as ID Cards and DL Cards can be processed with up to eight lines across the sheet.
Polycarbonate Sheet-Fed
SPECIFICATIONS RADUS SV-360 PC
Functions Processing Polycarbonate Sheets from 50 mic Basic version from 1 x Hologram application head HP3 Expandability up to 8 x Hologram application heads HP3 across DOVID hot stamping size up to ø40mm Deep pile feeder and delivery - 650mm height Feeder with sheet pre-separation and electrostatic discharge Electrostatic discharge of finished polycarbonate sheets Basic Machine SV-360 PC with Hologram Applicator Controlling Microprocessor Operation Fully automatic / intermittent Controll desk Touch display Transport System Sheet width 120mm up to 520mm Sheet length 250mm up to 750mm Sheet Substrate 50 - 150 mic polycarbonate PC 60 - 500 g/m² paper / teslin (up to 0.5mm) Hologram Applicator HP3 Foil size Width 55mm, max. diameter ø 150mm Core diameter 1“ and 3“ Stamping size up to 1300mm², ø40mm, width max. 50mm Stamping die brass / steel Stamping distance across from > 35mm, feed direction no min. limit Temperature 70° bis 250°C Dwell time 0,05 - 10 sec. Cooling time 0,01 - 10 sec. Registration mark Optical sensor direct at the hot stamping die Foils Registered security DOVIDs, OVDs and holograms - metallized and demetallized, KINEGRAM®s Foil separator Fully automated foil separation for ensureing a clean result and sharp hologram edges after the stamping / cooling process Connections Air connection 4 – 8 bar, oil-free and dry Electrical con. Single phase 220-240V (110V), 50/60Hz Dimensions Length from 4000 x Depth 800 x Height 1500mm Performace • 1 hologram on single PC sheet - max. 5.000 sheets/h • 48 holograms on PC sheet 6 x 8 accros - over 50.000 holograms / h
Video SV-360 PC   Sales Contact 
© 2021 Arnold Herzig GmbH • Germany - All rights reserved

Smart and Innovative Solutions for the Security Printing Industry

Smart and Innovative Solutions - since 1964
Arnold Herzig GmbH
En
De
The Radus SV-360 PC offers the efficient application of embedded DOVIDs (Holograms / Kinegrams) onto polycarbonate sheets for passport data pages, driving licenses and ID documents in high volumes. Due to its modular construction, the machine covers the complete range of polycarbonate layouts from e.g. 2x2 to 4x5 for passport data pages, up to common layouts for embedded DOVIDs on ID cards and DL cards with 3x8 and 8x6 (ID-1). The system processes typical polycarbonate overlay films of common manufacturers from 50 to 150 micron and enables an output at an average of 1250 sheets / h for 3x8 (24 images) and 1000 sheets / h for 8x6 (48 images). Mirrored product layouts for passport holderpages can be easy processed in one production run by turned hologram feed direction of individual embossing stations. The sophisticated foil separation technology in combination the electrostatic discharge devices ensure a clean result and sharp hologram edges. HP3 hot stamping hologram applicator The well-proven hologram application head HP3 is especially suitable for applying embedded DOVID patches on polycarbonate overlay sheets up to secure Level 3 in a stamping size of max. ø40 mm. The heads work electronically / pneumatically and are monitored by the machine's process control. The HP3 unit contains the hot stamping press with the replaceable stamping die and the associated fine adjustment as well as the foil feed. In this way, the complete hologram application head can be moved across the sheet direction of run in a quick adjustment for positioning. There is no complex conversion of the stamping die or tracking of the foil; jobs can be set-up in shortest time. Print mark recognition with unique „on the fly“ image positioning A multistage tension control in the hologram hot foil track and an accurate guidance guarantee precise hologram feed. After registration mark detection „on the fly“, directly at the hot stamping die, the foil with the holographic image is positioned using electronics only (Resolution 0.01mm); there is no need for the time consuming manual fine adjustment of the photocells for image positioning. The image position of the hot foil hologram under the stamping die can be easily adjusted via the touch display - even during ongoing stamping operation. Options If necessary, further work stations can be retrofitted at any time. Here too, one or two HP3 hot stamping hologram heads can be used. Then, with up to eight hologram application heads, even smaller product sizes at individual sheets (8x6) such as ID Cards and DL Cards can be processed with up to eight lines across the sheet.
Polycarbonate Sheet-Fed
Functions Processing Polycarbonate Sheets from 50 mic Basic version from 1 x Hologram application head HP3 Expandability up to 8 x Hologram application heads HP3 across DOVID hot stamping size up to ø40mm Deep pile feeder and delivery - 650mm height Feeder with sheet pre-separation and electrostatic discharge Electrostatic discharge of finished polycarbonate sheets Basic Machine SV-360 PC with Hologram Applicator Controlling Microprocessor Operation Fully automatic / intermittent Controll desk Touch display Transport System Sheet width 120mm up to 520mm Sheet length 250mm up to 750mm Sheet Substrate 50 - 150 mic polycarbonate PC 60 - 500 g/m² paper / teslin (up to 0.5mm) Hologram Applicator HP3 Foil size Width 55mm, max. diameter ø 150mm Core diameter 1“ and 3“ Stamping size up to 1300mm², ø40mm, width max. 50mm Stamping die brass / steel Stamping distance across from > 35mm, feed direction no min. limit Temperature 70° bis 250°C Dwell time 0,05 - 10 sec. Cooling time 0,01 - 10 sec. Registration mark Optical sensor direct at the hot stamping die Foils Registered security DOVIDs, OVDs and holograms - metallized and demetallized, KINEGRAM®s Foil separator Fully automated foil separation for ensureing a clean result and sharp hologram edges after the stamping / cooling process Connections Air connection 4 – 8 bar, oil-free and dry Electrical con. Single phase 220-240V (110V), 50/60Hz Dimensions Length from 4000 x Depth 800 x Height 1500mm Performace • 1 hologram on single PC sheet - max. 5.000 sheets/h • 48 holograms on PC sheet 6 x 8 accros - over 50.000 holograms / h

Embedded DOVID Patch

Applicator for Polycarbonate PC

RADUS SV-360 PC [up to 8 Heads]
Video SV-360 PC   Sales Contact 
© 2021 Arnold Herzig GmbH • Germany - All rights reserved

Smart and Innovative Solutions for the Security Printing Industry

Embedded DOVID Patch Applicator for

Polycarbonate PC

RADUS SV-360 PC [up to 8 Heads]
Smart and Innovative Solutions - since 1964
Arnold Herzig GmbH
En
De
The Radus SV-360 PC offers the efficient application of embedded DOVIDs (Holograms / Kinegrams) onto polycarbonate sheets for passport data pages, driving licenses and ID documents in high volumes. Due to its modular construction, the machine covers the complete range of polycarbonate layouts from e.g. 2x2 to 4x5 for passport data pages, up to common layouts for embedded DOVIDs on ID cards and DL cards with 3x8 and 8x6 (ID-1). The system processes typical polycarbonate overlay films of common manufacturers from 50 to 150 micron and enables an output at an average of 1250 sheets / h for 3x8 (24 images) and 1000 sheets / h for 8x6 (48 images). Mirrored product layouts for passport holderpages can be easy processed in one production run by turned hologram feed direction of individual embossing stations. The sophisticated foil separation technology in combination the electrostatic discharge devices ensure a clean result and sharp hologram edges. HP3 hot stamping hologram applicator The well-proven hologram application head HP3 is especially suitable for applying embedded DOVID patches on polycarbonate overlay sheets up to secure Level 3 in a stamping size of max. ø40 mm. The heads work electronically / pneumatically and are monitored by the machine's process control. The HP3 unit contains the hot stamping press with the replaceable stamping die and the associated fine adjustment as well as the foil feed. In this way, the complete hologram application head can be moved across the sheet direction of run in a quick adjustment for positioning. There is no complex conversion of the stamping die or tracking of the foil; jobs can be set-up in shortest time. Print mark recognition with unique „on the fly“ image positioning A multistage tension control in the hologram hot foil track and an accurate guidance guarantee precise hologram feed. After registration mark detection „on the fly“, directly at the hot stamping die, the foil with the holographic image is positioned using electronics only (Resolution 0.01mm); there is no need for the time consuming manual fine adjustment of the photocells for image positioning. The image position of the hot foil hologram under the stamping die can be easily adjusted via the touch display - even during ongoing stamping operation. Options If necessary, further work stations can be retrofitted at any time. Here too, one or two HP3 hot stamping hologram heads can be used. Then, with up to eight hologram application heads, even smaller product sizes at individual sheets (8x6) such as ID Cards and DL Cards can be processed with up to eight lines across the sheet.
Polycarbonate Sheet-Fed
Functions Processing Polycarbonate Sheets from 50 mic Basic version from 1 x Hologram application head HP3 Expandability up to 8 x Hologram application heads HP3 across DOVID hot stamping size up to ø40mm Deep pile feeder and delivery - 650mm height Feeder with sheet pre-separation and electrostatic discharge Electrostatic discharge of finished polycarbonate sheets Basic Machine SV-360 PC with Hologram Applicator Controlling Microprocessor Operation Fully automatic / intermittent Controll desk Touch display Transport System Sheet width 120mm up to 520mm Sheet length 250mm up to 750mm Sheet Substrate 50 - 150 mic polycarbonate PC 60 - 500 g/m² paper / teslin (up to 0.5mm) Hologram Applicator HP3 Foil size Width 55mm, max. diameter ø 150mm Core diameter 1“ and 3“ Stamping size up to 1300mm², ø40mm, width max. 50mm Stamping die brass / steel Stamping distance across from > 35mm, feed direction no min. limit Temperature 70° bis 250°C Dwell time 0,05 - 10 sec. Cooling time 0,01 - 10 sec. Registration mark Optical sensor direct at the hot stamping die Foils Registered security DOVIDs, OVDs and holograms - metallized and demetallized, KINEGRAM®s Foil separator Fully automated foil separation for ensureing a clean result and sharp hologram edges after the stamping / cooling process Connections Air connection 4 – 8 bar, oil-free and dry Electrical con. Single phase 220-240V (110V), 50/60Hz Dimensions Length from 4000 x Depth 800 x Height 1500mm Performace • 1 hologram on single PC sheet - max. 5.000 sheets/h • 48 holograms on PC sheet 6 x 8 accros - over 50.000 holograms / h
Video SV-360 PC   Sales Contact 